Water repellent impregnation for absorbent cementitious substrates. It penetrates deep into the open pores of the substrate, providing durable water repellency, while still allowing water vapour diffusion in both directions. It does not change the appearance of the substrate and does not make film on the surface. It is used as water repellent and colourless protective surface for treatment absorbent exposed materials such as concrete, cementitious rendering, concrete tiles, fibre cement, brickwork (clay and lime sand, non-vitrified), natural stone etc. Nanoline 80 W can also be used as hydrophobic primer under water-based protective coatings. Suitable for reduction of capillary water absorption, reduction of efflorescence, reduction of dirt pick-up and improvement of thermal insulation.
Form: liquid emulsion.
Basis: silane / siloxane water dispersion.
Density: 1,0 kg / l
Ph: between 6-8
Curing time: 5-10 hours
Nanoline 80 W
Consumption
0,2-0,3 kg/m2Colors
transparentPackaging
1kg, 5kg, 20kgDownloads
Bausil
Acrylic water-based varnish for waterproofing BAU RESINA microcement decorative system. BAUSIL is a water repellent matt transparent impregnation system, without solvents for complete waterproofing …
Kapagrip
Primer consisting of synthetic resin and quartz sand. Ideal for priming generally absorbent mineral surfaces before applying renders. Ideal substrate for all acrylic renders …
Nanoline 80 W
Water repellent impregnation for absorbent cementitious substrates. It penetrates deep into the open pores of the substrate, providing durable water repellency, while still allowing …
Baulat
High-density, multi-purpose copolymeric emulsion specially designed for multiple improvements and enhancements of cement mortar properties. For development of waterproof, durable and crack-resistant renderings and …
Superlat Latex
Multi-purpose copolymeric emulsion specially designed to multiple improvements and enhancements of cement mortar properties. For development of waterproof, durable and crack-resistant renderings and mortars. …
Stela
Plasticizer for cement mortar admixtures fully replacing lime. Use as an additive at a very small amount during mixing of mortars with water for …
Baucolor
Mineral oxide, powder pigment for coloring plaster, concrete and mortar. Add to dry cement mix with aggregate before mixing with water. For indoor and …